OnlineAuctionMoms.com

Author Archive

Learning how to mount solar panels to your roof is not as hard as you may think, though you must be aware of certain things that will impact the safety of the process and the endurance of the product. It consists, in part of, bolting solar racking into the rafters of your home (roof side) which then provides the basis for attaching the panels. Once you have made your purchase you need to know how to mount solar panels. Here are some things to be aware of before getting started.

Something to be aware of when learning how to mount solar panels is not the weight or threat of the roof collapsing, but the up force that the wind can cause. This means it’s very important for the solar racking to be carefully attached to the roof, not just by the top layer of sheathing, but bolted into the roof itself. Finding the precise center of the rafters can take a bit of extra time but it will also insure that the installation stays in position.

How to mount solar panels on a flat roof is very different from a slanted one, as it is necessary to build some sort of solar mounting system under the solar racking, to keep them at the desired tilt angle. Also, the material on the roof will impact the cost of the process, with tiles costing more. This is because of the fragility of the tiles, the risk of needing to replace them because of cracking and the time it will take to drill through them all. Because of these factors, composite, or asphalt roofs are normally the easiest to install upon.

The location of your solar panels can have a big impact on how much electricity is produced and available for use. Be aware of the fact that putting your panels near trees could result in them being over shadowed and therefore not optimally productive. Also, note that the shadow made by your house moves at up to 22 feet farther to the south in the winter. If your panels end up falling under that shadow you will miss out on a lot of electricity during those winter evenings.

Solar panels will help optimize your electrical production. Solar panels produce the most electricity when the solar racking situates them as close to perpendicular as possible. You will need to adjust the angle they face at least 4 times each year because the sun changes angles throughout the year. Again, the closer to perpendicular the panels sit, the more electricity you will have.

To get more information about how to mount solar panels or solar racking, check online or ask for referrals.

Learn more about how to mount solar panels. Stop by Lucy Cho’s site where you can find out all about solar racking and what it can do for your home.

Solar panels and the solar mounting systems they reside on are providing a new means by which to power our homes, one that is quite possible the future of electricity production for individual residences. Solar panels and the associated accessories are not the cheap, but you get what you pay for and they will definitely pay for themselves over the next few years, especially if fuel costs increase consistently. If you are wondering how to mount solar panels the information below should prove helpful. Self-installation is not for everyone, but if you are relatively handy and are comfortable using tools then you should be able to do it. If you are unsure you can always have someone install it for you, but this will cost a bit extra.

Before you get excited and install your solar mounting systems, you had best speak to the local zoning board about whether you can have them in your neighborhood. Not all communities allow them, with others requiring a permit or pass to be purchased. Make sure to deal with all of this beforehand so you can focus fully on how to mount solar panels and on being safe as you do so.

Installing solar mounting systems isn’t a very complicated process, beginning with simply picking the location for your solar panels where they will receive the most sunlight (either the east or west side). You will then need to work out the latitude tilt of your roof. If you live below twenty-five degrees latitude, your solar panels will need to be tilted towards the sun in the amount of latitude number. Approximately four feet apart and on top of the rafters is the best place to situate your mounts and you can use the blueprint of your home or a stud finder to locate these.

Your next move is to then drill holes carefully into the rafters. Be conscientious during this process, as you do not want them to split. These holes are the location that your steel bolts will slide into; to fasten the solar panel mounts to roof. Secure the mounts with steel bolts and then carefully seal the area around the bolts in order to keep your thermal envelope airtight and to avoid leaks getting into your home.

Getting the solar panels to attach to the solar mounting systems shouldn’t be too complex, as they are built to easily fit together. The solar panels will work best when they sit at least a quarter inch above roof level, because this allows the wind to blow underneath them, which helps them work at their best. You are then ready to hook the electrics up, although a qualified electrician, as opposed to yourself, sometimes does this best.

If you are interested in learning how to mount solar panels in a solar mounting system then speak to a local expert or manufacturer for more details.

Learn more about how to mount solar panels. Stop by Lucy Cho’s site where you can find out all about solar mounting systems and what they can do for you.